STK-0029 Datasheet| Parameter | Symbol | Conditions | min | typ' | max | Unil | | Daia retention supply voltaga | VDR1 | V E ?VCC-0.2V,VCE2ZVCC-0.2y, or VCE2 < 0.2 V | 2.0 | | 5.5 | V | | VDR2 | VCE20.2V | 2,0 | | 5.5 | | | | | vcc = 3.0 V, | -20 to +850C | | | 24 | | | oCCDR1 | v~ > vcc - 0.2 V, | -20 to +700C | | | 12 | | VCE2 ! VCC -0.2 V, Of VCE2 S 0.2 V | -20 lO +40'C | | | 2.4 | LJA | | Data reiention supply current | 250C | | 04 | 1 2 | | | | -20 to +850C | | | 24 | uA | | vcc - 3.0 V, | -20 to +700C | | | 12 | | 'CCDR2 | VCE2 < 0.2 V | -20lO +400C | | | 2 4 | | 250C | | O4 | 1 2 | | Chip enable setup time | oCDR | | 0 | | | ns | | criip enable holtl time | tR | | 5 | | | ms | | | | | | | | | STK-0029 Price| Items | Symbols | Ratings | Units | | Collecter-Emitter Voltage | VCES | 600 | V | | Gate-Emitter Voltage | VGES | ±20 | V | | | Continuous | lc | 200 | | | Collecter | 1ms | lc pulse | 400 | | Current | Continuous | -lc | 200 | A | | 1ms | -lc pulse | 400 | | Max. Power Dissipat | on | Pc | 800 | W | | Operating Temperature | Ti | +150 | oC | | Storage Temperature | Tstg | -40 to +125 | oc | | Net. Weight | | 340 | g | | Isolation Voltage | AC. 1min. | Viso | 2500 | V | | | Mounting'1 | 35 | | | Screw Torque | Terminals+1 | 35 | kgcm | | | | | | STK-0029 on stock| DC _ | < | jf | j | | 1800 _ 1200 ___ | | | 7 | | 3100 -_/ | | F | | | | | | ___________ | ] | | RMS LirT | 1 | y | J , | | | r | | )nduction Period- I 60.PF.. Series | | jj | | | Tj = 15010C | | | | | |
TxEN -Transmit Enable: When set HIGH, this bit enables the transmitter and when LOW, disables it setting the serial output (CDSTo) to high impedance state. If the transmitter is disabled during the transmission of a packet using this bit, the Protocol Controller will wait until the completion of the packet and closing flag is transmitted or the packet is aborted before setting the output (CDSTo) to high impedance state. Thus TxEN bit controls the |