Serial Data (SDA) SDA is a bidirectional pin used to transfer data into and out of the device. It is an open drain output and may be wire-ORed with any number of open drain or open collector outputs. An open drain output requires the use of a pull-up resistor. For selecting typical val- ues, refer to the guidelines for calculating typical val- ues on the bus pull-up resistors graph.
STK10C68-P55I on stock| SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT |
| IR reverse current V R= 6 V; see Fig.2 10 nA V R=6 V; Ti=850C; see Fig.2 200 nA |
| r s diode series resistance f = 470 MHz; V R=1 V 0.5 - |
| C d diode capacitance VR= 1 V; f= 1 MHz; 4.75 5.3 5.75 pF see Figs l and 3 VR=4V;f=1 MHz; 2.05 2.25 2.55 pF see Figs l and 3 |
| C d { 1V) capacitance ratio f=l MHz 2.1 2.35 - C d { 4V) |
| PIN | | |
| MAX6332 | MAX6333 MAX6334 | NAME | FUNCTION |
| 1 | 1 | GND | Ground |
| | 2 | RESET | Active-Low Reset Output. RESET remains low while Vcc is below the reset threshold and for a reset timeout period (tRP) after Vcc rises above the reset threshold. RESET on the MAX6334 is open-d rain. |
| 2 | | RESET | Active-High Reset Output. RESET remains high while Vcc is below the reset threshold and for a reset timeout period (tRP) after Vcc rises above the reset threshold. |
| 3 | 3 | Vcc | Supply Voltage (0.7V t0 5.5V) |
| | | |
