STK11C88-SF35，there are the best STK11C88-SF35 suppiers all over the world here.These are the list and detailed contact method of STK11C88-SF35 suppliers all over the world as follows.You can buy or get informations of STK11C88-SF35 through email , message or tel.

suppliers of STK11C88-SF35 and PDF data of STK11C88-SF35

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

STK11C88-SF35 Datasheet

"End" instruction will power down SNC11A and enable IC to consume fewer current for power saving.(<3uA @VDD=3V and <5uA @VDD=5V) Please be aware that when the power down mode is activated in SNC11A, any valid data transition (L->H or H ->L) occurring on any input port (P1) or lo ports (P2 and P3) will lead SNC11A back to normal operation mode.
STK11C88-SF35 Price



			____
	____

STK11C88-SF35 on stock

Layout The MIC5206-x.xBM5 (5-lead SOT-23 package) has the following thermal characteristics when mounted on a single layer copper-clad printed circuit board. Multilayer boards having a g round plane,wide traces nearthe pads, and large supply bus lines provide better thermal conductivity.


prty_en	ln	Enable parity checking on the Utopia interface. If disabled (tied t0 0), the wrx_err_stat(0) signal can be ignored and left open and the rx parity input should be tied t0 0. Also the tx parity pins can be left open.
cellsize[7:0]	In	Define cellsize: sets the size in bytes of a cell. Binary value to be set usually by board wiring. The size must be a multiple of 4.

Suppliers Datasheet
		Exact Matc