STK25CA8-D45，there are the best STK25CA8-D45 suppiers all over the world here.These are the list and detailed contact method of STK25CA8-D45 suppliers all over the world as follows.You can buy or get informations of STK25CA8-D45 through email , message or tel.

suppliers of STK25CA8-D45 and PDF data of STK25CA8-D45

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

STK25CA8-D45 Datasheet

Pin No.	Symbol	Pin Description
1	SOURCE1	Source pin l
2	IN1	Input pin 1 This pin is connected to a pull-down resistor internally, so that even when input wiring is open-circuited, output can never be turned on inadvertently.
3	SOURCE2	Source pin 2
4	IN2	Input pin 2 This pin is connected to a pull-down resistor internally, so that even when input wiring is open-circuited, output can never be turned on inadvertently.
5.6	DRAIN2	Drain pin 2 Drain current is limited (by current limiter) if it exceeds l A (min) in order to protect the lC.
7.8	DRAIN1	Drain pin 1 Drain current is limited (by current limiter) if it exceeds l A (min) in order to protect the lC.

STK25CA8-D45 Price

Test Condition: Vdd = +2.8V, RF = 1855MHz, LO = 1635MHz, IF = 220MHz, LO input = -4dBm, RF input = -3CdBm,Tc= +25?C,unlessotherwise Soeci~d. Min./Max. Iimits are at +25? C case temperature unless otherwise specified. Conversion Gain and ldd depends on the values of the two resistors used in the G/C circuit. Data includes image reject filter (Sawtek P/N: 356083) insertion loss of l.7 dB
STK25CA8-D45 on stock

IOUT= 500mA
VIN	J	f+ 50	r	^S R	{	LE

							COUT= 47
						k	S TAn	OLID TALUN
								L
								k
						OUT=	3 3	-_
						SOLID
						ANTALU

SYMBOL	PARAMETER		MIN	MAX	UNITS
		Commercial TA = OIC to + 70IC	4.75	5.25	V
Vcc	Supply Voltage	Industrial TA = -40IC to + 85IC	4.5	5.5	V
VIL	Input Low Voltage		0	0.8	V
VIH	Input High Voltage		2.0	Vcc+l	V

Suppliers Datasheet
		Exact Matc