FEATURES . Enhancement-Mode MOSFET Transistors (IDDO @ VDD=7.2V, VGG=OV) . Pout>7W @ VDD=7.2V, VGG=3.5V, Pin=50mW ' r1T>40% @ Pout=6.5W (VGG control), VDD=7.2V, Pin=50mW . Broadband Frequency Range: 330-400MHz . Low-Power Control Current IGG=lmA (typ) at VGG=3.5V . Module Size: 30 x 10 x 5.4 mm
TLV2773IDGSG4 Price Hitachi Asia Ltd. Hitachi Tower 16 Collyer Ouay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg
TLV2773IDGSG4 on stock| CHARACTERISrrIC | SYMBOL | RATING | UNIT |
| Supply Voltage Range | Vcc | -0.57 | V |
| DC Input Voltage | VIN | -0.5 N Vcc+0.5 | V |
| DC Output Voltage | VOUT | -0.5 N Vcc+0.5 | V |
| Input Diode Current | IIK | ±20 | mA |
| Output Diode Current | IOK | ±20 | mA |
| DC Output Current | IOUT | ±25 | mA |
| DC Vcc/Ground Current | Icc | ±25 | mA |
| Power Dissipation | PD | 200 | mW |
| Storage Temperature | Tstg | -65150 | |
| Lead Temperature (10s) | TL | 260 | |
| | | |
| Pin Number | Signal Name | Description |
| 1 | V3 3P | Main power input to the receiver. Input power requirements are defined in Table 3. |
| 2 | GND | DC ground to the receiver. |
| 3 | TX1 | Primary asynchronous full-duplex serial data port transmit (TX) line. Binary and NMEA mes- sage protocols are supported. The default settings are: Message format Binary Baud 19200bps Parity None Data Bits 8 Stop Bit 1 For additional information, see the GPS receiver evaluation kit user manual. |
| 4 | RX1 | Primary asynchronous full-duplex serial data port receive (RX) line. Binary and NM EA message protocols are supported. The default settings are: Message format Binary Baud 19200bps Parity None Data Bits 8 Stop Bit 1 For additional information, see the GPS receiver evaluation kit user manual. |
| 5 | TMARK | UTC time-mark pulse, one pulse per second. The Binary message OTMP contains the UTC time associated with the time-mark pulse. |
| 6 | V ANT | Provides a power connection to the center conductor of the RF connector. |
| 7 | V2 5BU | Provides a back-up power connection for the receiver's real time clock (RTC). Input power requirements are defined in Table 3. |
| 8 | RX2 | Auxiliary asynchronous full-duplex serial data port receive (RX) line. DGPS RTCM SC-104 mes- sage protocol is supported. The default settings are: Message format RTCM SC-104 Baud 9600 Parity None Data Bits 8 Stop Bit 1 For additional information, see the GPS receiver evaluation kit user manual. |
| | |
