TMS-3-32-1.75 TMS-3-32-1.75 TMS332175 Datasheet| Item | Configuration | Remarks | | Optical system | Rod lens array | Angular aperture: 20 degrees | | | | Blue ( = 470nm) | (LEDl,LEDO)=(1,0) | | Green ( = 525nm) | (LEDl,LEDO)=(O,1) | | Light source | LED light source | Red ( = 655nm) | (LEDl,LEDO)=(O,O) | | Infra-red( = 940nm) | (LEDl,LEDO)=(1,1) | | | For sensor drive | SV×(0.5A) | TBD | | | Blue | 45mAmax. | at LED On duty l/4 | | Power supply | Green | 45mAmax. | | For LED | Red | 3 SmAmax. | | Infrared | 50mAmax. | | Data output mode | 8-bit width digital output | TTL output | | Digital signal processing | Black output correction by sensitiveness (pixel unit) White output correction by sensitiveness (pixel unit) Gain adjustment (PGA) | PGA : Programmable Gain Amp. | | Block diagram | Fig1 | | | Timing diagram | Fig2 | | | Outline drawing | Fig4 | | | | | | |
TMS-3-32-1.75 TMS-3-32-1.75 TMS332175 Price| | Case l | Case 2 | Case 3 | Case 4 | | Linear Burst Mode | A1 | Ao | A1 | Ao | A1 | Ao | A1 | Aa | | First Address 1, Fourth Address | 0 0 1 1 | 0 1 0 1 | 0 1 1 0 | 1 0 1 0 | 1 1 0 0 | 0 1 0 1 | 1 0 0 1 | 1 0 1 0 | | | | | | | | | |
TMS-3-32-1.75 TMS-3-32-1.75 TMS332175 on stock While EN is asserted, the internal counter counts posi- tive edges of DAT. The number of sequential pulses on DAT determines the capacitance setting. As EN is de- asserted, the counter value is latched into the capaci- tance control registers first, and then the counter is set to zero. The programmed capacitance value then appears between CP and CM. During the period when EN is asserted, the capacitance value between CP and CM stays unchanged. Figure l is a digital timing dia- | PACKAGE | TUBE | T&R | | DIP | 74ACT14B | | | SOP | 74ACT14M | 74ACT14MTR | | TSSOP | | 74ACT14TTR | | | |
|
