| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
TMS46400PDGA Datasheet Track-and-Hold ( T/H) In track mode, the analog signal is acquired on the internal hold capacitor. In hold mode, the T/H switches open and the capacitive DAC samples the analog input. TMS46400PDGA on stock 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 400C (Ground fixed and controlled environment). 3. Should an 0/0 isolation be required, please order the converter with the following part number: RP03-XXXXDE/DS. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering. Other features of the LT1121/LT1121-3.3/LT1121-5 in- clude the ability to operate with ve ry small output capaci- tors. They are stable with only 0.33 on the output while most older devices require between 1 and lOOaF for stability. Small ceramic capacitors can be used, enhanc- ing manufacturability. Also the input may be connected to ground or a reverse voltage without reverse current flow from output to input. This makes the LT1121 series ideal for backup power situations where the output is held high and the input is at ground or reversed. Under these conditions only 16 will flow from the output pin to ground. |
