TMV2412D Datasheet The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. TMV2412D Price| Parameter | Symbol | Min | Max | Unit | | Input voltage | Vcc | 7 | 25 | V | | Output current | lo | | 1 | A | | | | | |
TMV2412D on stock| Zahlenscheibe Disque gradcd Figure dial . 0 44mm 53 mm Q 63 mm | 042-5020 042-5030 | 300 O11 042·5100 | 300 112 042·5200 | 27040 @ 113 042.5700 | 042-5900 | 042-5901 | | 0 44mm | 0425800 | | | | | | | | | | | | |
| | | | Limits | | Characteristic | Test Pin | Test Conditions | Min. Typ. Max. | Units | | Supply Voltage Range | 6 | Operating | 6.0 9.0 12 | v | | Detector Input Current | 15 | 0 t0 40% RH, VIN = 0 t0 9.0 V | ±1.0 | pA | | Input Offset Voltage | 14-15 | Active Guard | ±100 | mV | | 16-15 | Active Guard | +100 | mV | | 15-13 | Detect Comparator | ±50 | mV | | Common Mode Range | 14-15 | Guard Amplifier | 2.0 - VDD- 0.5 | V | | 13-15 | Smoke Comparator | 0.5 - VDD -2.0 | V | | Active Guard Impedance | 14 | to Vss | 10 | k 1 | | 16 | to Vss | 500 | k | | Oscillator Period | 12 | No Alarm | 1.34 1.67 2.00 | S | | Alarm | 32 40 48 | ms | | Oscillator Pulse Width | 4 | | 8.0 10 12 | ms | | Low Voltage Threshold | 6 | T=0 t0 50IC | 7.2 7.8 | V | | Horn Output Voltage | 10-11 | IOUT = 16 ffiA, VDD = 9.0 V | 0.1 0.5 | V | | IOUT = 16 rTiA, VDD = 7.2 V | 0.9 | V | | IOUT = -16 rTiA, VDD = 9.0 V | 8.5 8.8 | V | | IOUT = -16 ffiA, VDD = 7.2 V | 6.3 | V | | Horn Output ON Time | 10-11 | Alarm | 120 160 208 | ms | | Low Battery | 8.0 10 12 | ms | | Horn Output OFF Time | 10-11 | Alarm | 60 80 104 | ms | | Low Battery | 32 40 48 | S | | LED Output ON Current | 5 | VDD = 7.2 V, Vour = 1.0 V | 10 | mA | | LED Output ON Time | 5 | | 8.0 10 12 | ms | | LED Output OFF Time | 5 | No Alarm, In Standby | 32 40 48 | S | | I/O Current | 2 | No Alarm, Viio = VDD - 2.0 V | 25 60 | | | Alarm, Vi/o = VDD - 2.0 V | -7.5 | mA | | I/O Alarm Voltage | 2 | External "Alarm" In | 3.0 | V | | I/O Delay | 2 | Alarm" Out | 3.0 | S | | Supply Current | 6 | VDD = 9.0 V, No Alarm, No Loads | 5.0 9.0 | | | VDD = 12 V, No Alarm, No Loads | 12 | | | | | | |
|
