TIMap-2  > TMX320DA300ZZG

suppliers of TMX320DA300ZZG and PDF data of TMX320DA300ZZG

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  

TMX320DA300ZZG Datasheet
This is an optional analog output voltage that indicates the bias current being supplied to the laser. It is refer- enced to VEE. The conversion for this monitor output is 20 mV for every l mA of bias current to the laser. For example, a 400 mV output above VEE would indicate 20 mA of bias current to the laser.
TMX320DA300ZZG Price

Max. forward voltage VBR 220 V drop at IF = 100 A VBR > 220V (Note l) 3.5 V 5.0 V
Rthj_, Max. thermal resistance (1 = 10 mm.) 20 0C/W


TMX320DA300ZZG on stock
The intended application of this device is for point to point baseband transmission rates over a controlled impedance media of approximately ioo I . The maximum rates and distance of data transfer are dependent upon the attenuation characteristics of the media selected and the noise coupling to the environment.

ltem Symbol Typ. Unit Remark
Capacitance between vertical transfer clock and GND CoV1COV3 1,300 pF
COV2COV4 1,300 pF
Capacitance between vertical transfer clocks COV12, COV34 600 pF
COV23, COV41 230 pF
COV13 1 20 pF
CV24 90 pF
Capacitance between horizontal transfer clock and GND COH1COH2 38 pF
Capacitance between horizontal transfer clocks COH12 38 pF
Capacitance between substrate clock and GND USUB 1 120 pF
Vertical transfer clock serial resistor RoviROV4 40 Q
Vertical transfer clock ground resistor ROVGND 1 5 Q
Horizontal transfer clock serial resistor ROH1ROH2 1 0 Q
Reset gate clock serial resistor RORS 1 00 Q