TMX320F28334ZHHA，there are the best TMX320F28334ZHHA suppiers all over the world here.These are the list and detailed contact method of TMX320F28334ZHHA suppliers all over the world as follows.You can buy or get informations of TMX320F28334ZHHA through email , message or tel.

suppliers of TMX320F28334ZHHA and PDF data of TMX320F28334ZHHA

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

TMX320F28334ZHHA Datasheet

	[lc = 20 A * IBl = -20 A * lB2 1 I
	l
j	<s	I

TMX320F28334ZHHA Price

High operating frequency: fin = 600MHz Low power supply voltage: Vcc = 2.7 t0 5.5V Low power supply current: Icc = 11mA typ, @3V Wide operating temperature: TA = -40 t0 85YC Two charge pumps Low sensitivity charge pump for transmit High sensitivity charge pump for reception Plastic 20-pin dual in line package (Suffix: -P) Plastic 20-pin flat package (Suffix: -PF)
TMX320F28334ZHHA on stock

Pin Number N, M, MM	Pin Number -1BN, -1BM	Pin Name	Pin Function
1	1	COMP	Compensation: Connect external compensation network to modify the error amplifier output.
	2	NC	Not internally connected.
2	3	FB	Feedback (lnput): Error amplifier input. Feedback is 2.5V at desired output voltage.
	4	NC	Not internally connected.
3	5	ISNS	Current Sense (Input): Current sense comparator input. Connect to current sensing resistor or current transformer.
	6	NC	Not internally connected.
4	7	RT/CT	Timing Resistor/Timing Capacitor: Connect external RC network to select switching frequency.
5		GND	Ground: Combined analog and power ground.
	8	PGND	Power Ground: N-channel driver transistor ground.
	9	AGND	Analog Ground: Controller circuitry ground.
6	10	OUT	Power Output: Totem-pole output.
	1 1	VD	Power Supply (Input): P-channel driver transistor supply input. Return to power ground (PGND).
7	12	VDD	Analog Supply (lnput): Controller circuitry supply input. Return to analog ground (AGND).
	13	NC	Not internally connected.
8	14	VREF	5V Reference (Output): Connect external RC network.

Thermal Resistance vs Mounting Pad Area The maximum rated junction temperature, TJM, and the thermal resistance of the heat dissipating path determines the maximum allowable device power dissipation, PDM, in an application. Therefore the application's ambient temperature, TA (oC), and thermal resistance RejA (oC/W) must be reviewed to ensure that TJM is never exceeded. Equation 1 mathematically represents the relationship and serves as the basis for establishing the rating of the part.

Suppliers Datasheet
		Exact Matc