| Characteristic | Symbol | Test Circuit | Test Condition | Min | Typ | Max | Unit |
| Detecting voltage | Vs | 1 | RL=200Q r VOL< 0.4V | 3.75 | 3.9 | 4.05 | V |
| Low Level Output voltage | VOL | 1 | RL=200Q | | | 0.4 | V |
| Output Leakage Current | IOH | 1 | VcC=15V | | | 0.1 | A |
| Hysteresis Voltage | Vs | 1 | RL=200Q | 30 | 50 | 100 | mV |
| Detecting Voltage Temperature Coefficient | Vs/AT | 1 | RL=200Q | | ±0.01 | | % |
| Circuit current at on Time | IccL | 1 | VcC = VSmin - 0.05V | | 300 | 500 | A |
| Circuit current at off Time | IccH | 1 | Vcc= 5.25V | | 30 | 50 | uA |
| Threshold Operating Voltage | Vopr | 1 | RL=200Q r VOL< 0.4V | | 0.8 | | V |
| 'L' Transmission Delay Time | tPHL | 2 | RL=1.0 k92, CL=100 pF | | 10 | | lls |
| 'H' Transmission Delay Time | tPLH | 2 | RL=1.0 k92, CL=100 pF | | 15 | | lls |
| Output Current at on Time I | IOLI | 1 | VcC = VSmin - 0.05V Ta = 250C | 20 | | | mA |
| Output Current at on Time II | IOLII | 1 | VcC = VSmin - 0.05V Ta = -30^ +750C | 16 | | | mA |
| | | | | | | |
| Frequency | Z Source Q | Z Load Q |
| MHz | R | jX | R | jX |
| 1930 | 11.2 | -10.50 | 2.79 | -4.32 |
| 1945 | 11.8 | -9.23 | 2.62 | -4.23 |
| 1960 | 12.4 | -8.01 | 2.45 | -4 .14 |
| 1975 | 13.0 | -6.79 | 2.27 | -4.05 |
| 1990 | 13.6 | -5.56 | 2.10 | -3.96 |
| | | | |
The SuperMESH rM series is obtained through an extreme optimization of ST's well established strip-based PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications.
