TN-171 Datasheet| SYMBOL | PARAMETER | MIN | UNIT | | lL | Nominal load current (ISO) | 3.5 | A | | SYMBOL | PARAMETER | MAX | UNIT | | VBG lL | Continuous off-state supply voltage Continuous load current Continuous junction temperature On-state resistance | 50 1 0 1 50 1 00 | V A ml | | | | |
TN-171 Price| Pin No. | Mnemonic | UnCt10n | | 1 2 3 4 5 6 7 8 9 10 | IOUT1 IOUT2 GND SCLK SDIN SYN~ LDAC VDD VREF RFB | DAC Current Output. DAC Analog Ground. This pin should normally be tied to the analog ground of the system. Digital Ground Pin. Serial Clock Input. Data is clocked into the input shift register on each falling edge of the serial clock input. This device can accommodate clock rates of up t0 50 MHz. Serial Data Input. Data is clocked into the 8-bit input register on each falling edge of the serial clock input. Active Low Control Input. This is the frame synchronization signal for the input data. When SYNC goes low, it powers on the SCLK and DIN buffers and the input shift register is enabled. Data is transferred on each falling edge of the following 8 clocks. Load DAC Input. Updates the DAC output. The DAC is updated when this signal goes low or alternatively, if this line is held permanently low, an automatic update mode is selected whereby the DAC is updated after 8 SCLK falling edges with SYNC low. Positive Power Supply Input. This part can be operated from a supply of 2.5 V t0 5.5 V. DAC Reference Voltage Input Terminal. DAC Feedback Resistor Pin. Establishes voltage output for the DAC by connecting to extemal amplifier output. | | | |
TN-171 on stock| Part Number | Package | | ACS755SCB-200-PSF | Formed signal pins | | ACS755SCB-200-PSS | Straight signal pins | | |
| | Parameter | Min | Typ. | Max | Units | Conditions | | IS | Continuous Source Current (Body Diode) | | | -2.2 | A | MOSFET symbol showing the | 9 | | ISM | Pulsed Source Current (Body Diode) Oi | | | -33 | integral reverse p-n junction diode. | | VSD | Diode Forward Voltage | | | -1.2 | V | TJ = 250C, Is = -2.2A, VGS = OV | | trr | Reverse Recovery Time | | 48 | 72 | ns | TJ = 250C, IF = -2.2A | | Qrr | Reverse RecoveryCharge | | 34 | 51 | nC | di/dt = 100A/ps | | | | | | | | |
|
