ternal +5V supply can be used to supply external circuits (See also AN495/0692). A signal is inter- nally generated to block the In signal, and prevent activation of the output switch, as long as an ab- normal condition is detected. The power-on tran- sition, as well as the chip overtemperature and the output overcurrent, concurr to the generation of such signal. A minimum delay of 25as (Typ. value) is added to the trailing edge of such signal to ensure that a stable normal situation is present when the signal disappears. The delay (of the dis- apperance of the block signal; no delay at its on set) can be further increased connecting a ca- pacitor between pin3 and ground. It can drive re- sistive or inductive loads.
TN0201KL-TR1 Price| Pin Number | Function | Description | Interface Schematic |
| 1- 14, 17 - 19, 21, 23, 24 | N/C | No Connection | |
| 15 | GND | This pin must be connected to RF & DC ground. | |
| 16 | RFOUT | RF output (AC coupled) | ____Rr T |
| 20 | Vcc | Supply Voltage Vcc= 3V | ~0 26F |
| | | Control Voltage Input. Modulation port bandwidth | 7 5nH 1500 VTUN[ |
| 22 | VTUNE | dependent on drive source impedance. Package bottom has an exposed metal paddle that | |
| | | |
| UN Number | None |
| Air (IATA) | Not classified. |
| Sea (IMO) | Not classified. |
| Road (ADR)/Rail (RID) | Not classified. |
| |
