| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
TN203U473KT Datasheet SHDN (Pin 3/4, -SHDN/Fixed Devices): The SHDN Pin is used to put the LT1 964 into a Low Power Shutdown State. The SHDN pin is referenced to the GND pin for regulator control, allowing the LT1 964 to be d riven by either positive or negative logic.The output ofthe LT1964 will be offwhen the SHDN pin is pulled within +0.8V of GND. Pulling the SHDN pin more than -1.9V or +1.6V will turn the LT1964 on. The SHDN pin can be driven by 5V logic or open TN203U473KT Price
TN203U473KT on stock The bits in Slot l are used to access the 16 bit control/status registers within the HMP9701. The address space allocated in slot l allows up t0 64 sixteen bit registers, however, only the even registers are valid (see ControUStatus register sec- tion for a complete register map). The control registers are read/writable to provide more robust testability. A read or write command is initiated by setting the Read/Write bit (Bit 19) in Slot l. A complete bit map for Slot l is given in the Table l. Note: control data will only be loaded into the target registers if Slot 2 (Control Data) is flagged as being valid.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
