| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
TNPW-1206-2371BT9T-R Datasheet PWM: A PWM (pulse width modulation) circuit is built-in SNC112. PWM can convert input digital data into pulse trains with suitable different pulse width. The maximum resolution of PWM is 7 bits. Two huge output stage circuits are designed in SNC112. With this advanced circuit, the chip is capable of driving speaker directly without external transistors. The recommended application circuit is illustrated as follows. TNPW-1206-2371BT9T-R Price BEFORE INSTALLATION,ISOLATE THE SUPPLY. Connect the supply and the probes as shown in the diagram below. Set the 'sensitivity adjustment to minimum. Immerse both probes in the liquid to be monitored then apply power and the green 'supply on' LED should illuminate. Rotate the 'sensitivity adjustment until the relay changes state. Remove the probes from the liquid and the relay should change state again. Now set the 'sensitivity adjustment midway between the setting obtained and maximum. This should now be the correct TNPW-1206-2371BT9T-R on stock
The BIOS May Also Be Updating the Screen If using the ElanSC300 microcontroller evaluation board with an LCD standalone, (i.e., not option 1 above) and booting to DOS, note that the BIOS is ac- cessing the Video registers every time it is called to up- date the screen (i.e., typing in debug or from the DOS prompt). If trying to use debug or other programs to modify the Video registers, be aware that they may be modified by the BIOS as well, specifically Ports 3D8h and 3D9h. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
